2014 Aluminum Alloy UNS A92014

2014 aluminum is one of the strongest Heat-treatable alloys for screw machine applications. 2014 has good mechanical properties and has good weldability, but it has only fair corrosion resistance.  It can be substituted for 2024 in many applications.

Applications: Screw Machine, Aerospace, General applications.

Aging: Artificial aging is most commonly used for this alloy.  Tempering is widely used for most applications, T-4/T451, T-6/T651 are most commonly used.

Chemistry Analysis
Titanium Max 0.15% Manganese 0.40 – 1.20%
Titanium/Zinc Max 0.2% Copper 3.9 – 5.0%
Silicon 0.50 – 1.20% Chromium  Max 0.10%
 Zinc  Max  0.25%  Iron  Max 0.70%
Magnesium 0.20 – 0.80%  Aluminum Balance

Typical Room Temperature Tensile Properties

Temper Temperature Yield 0.2% Yield 0.2% Ultimate Tensile Strength % Elongation in 2” (50.8mm)
0.2% offset 0.2% offset
ksi mpa ksi mpa
0 Temper 14 97 27 186 18
T-4 42 290 62 427 20
T-6 60 414 70 483 13

Machinability: 2014 machines easily in any condition

Specifications: AMS 4121, ASTM B211

 

Shapes Manufactured:

Flat Bars, Square Bars, Round Bars, Rings, Hollows, Discs, Blocks and special Shapes.  Send us a drawing to see how we can save you material and Machining time!

The information in this data sheet is for information only and should not be used for engineering.